Air Compressor Won’t Turn On – How To Fix It

If your air compressor won’t turn on, there are a few things you can do to try to fix it. In this article, we will walk you through the most common reasons why is not working, and how to fix them.

Why Air Compressor Won’t Turn On And How To Fix It

In This article discusses the reasons why an air compressor might not turn on, and outlines some easy and difficult solutions.

1. The air compressor won’t turn on by a breaker

If you are having trouble turning on your air compressor, it may be because of a breaker. Check to make sure that the breaker is properly connected and that the power is turned on to the compressor. If all of these things check out, it may be that the compressor itself is not working. In this case, you will need to take it in for repair.

2. The air compressor won’t turn on by a fuse

If your air compressor not working by a fuse, it’s likely that the fuse is blown. To test if the fuse is blown, remove the cover of the air compressor and look for a fuse that is blown. If the fuse is blown, replace the fuse with a new one and try to turn on the air compressor again. If the air compressor still won’t turn on, it may be due to a problem with the power supply to the air compressor. In this case, you will need to contact an electrician to fix the power supply.

3. Circuit breaker

If the compressor won’t turn on by a circuit breaker, it may be due to a broken wire. Check all the wires and connectors for damage. If the wires are OK, but the compressor still won’t turn on, it may be due to a broken motor. Replace the motor if necessary.

4. Is there pressure in the tank

If your air compressor won’t turn on, there could be a few things wrong. First, check to see if there is pressure in the tank. If there isn’t enough pressure, the compressor might not be able to turn on. Next, make sure the fuse isn’t blown and that the power is turned on to the compressor. If all of these things are checked and the problem still persists, there might be a problem with the motor. If all of these things are checked and the problem still persists, there might be a problem with the motor. In most cases, a defective motor can be fixed by replacing it.

5. Check the Pressure Switch

If the compressor won’t turn on, there could be several reasons. First, check the pressure switch to see if it’s faulty. If the switch is good and the compressor still won’t turn on, it could be that the motor is faulty. In either case, you’ll need to take the compressor apart to fix it.

5. The air compressor won’t turn on by faulty motor

If your air compressor is not turning on, there may be a problem with the motor. Many times, the motor will just need to be replaced. In some cases, the motor may just need a new belt. If the compressor has been used recently and the motor is still not turning on, there may be a problem with the switch. It is important to take note of the symptoms and determine if a repair or replacement is necessary.

4. The compressor may be turned off by a timer

If your compressor won’t turn on, there is a good chance that it was turned off by a timer. To fix this, you will need to reset the timer and/or replace the compressor.

5. The battery may not be fully charged.

If now working May be because the battery isn’t fully charged. To check the battery’s charge, first make sure the air compressor is plugged into an outlet and turned on. Next, use an ohmmeter to measure the resistance between the terminals of the battery. If the battery is fully charged, the ohmmeter reading will be close to zero. If the battery is not fully charged, the ohmmeter reading will be high.

5. The compressor may be turned off by a power outage.

It may be because of a power outage. Check to see if the power is actually off at your house by checking the breaker box. If it’s not, then you may have to replace the fuse in the electrical panel. If the power is off at your house, you can try to restart the compressor by flipping the breaker for the electrical panel. If that doesn’t work, you may have to call a professional.

6. Insufficient Oil

It could be due to insufficient oil. To check if this is the case, you can remove the oil filter and use a light to look for oil. If there is not enough oil, you will need to add more oil to the compressor.

7. If not good working Clean the Air Filter

If the air compressor won’t turn on, it is likely that the air filter is not good. To clean the air filter, remove the cover and use a vacuum cleaner to clean the filter. Replace the air filter if it is dirty or if the compressor won’t turn on.

If your air compressor won’t turn on, there are a few things you can do to try and fix the problem different types of model like Husky, Bostitch, Dewalt, Craftsman, Kobalt, Porter Cable, Campbell Hausfeldin air compressor with a bit of research, most models can be fixed.

Conclusion

If your air compressor not working, don’t despair.  there are a few things you can do to try to fix it. In this article, we have walked you through the most common reasons why an its won’t turn on, and how to fix them. In most cases, it’s something simple that you can fix yourself.

I am Jason Hanson and live in Georgia. Graduated in Mechanical Engineering from the Georgia Institute of Technology in 2010 and have more than 12 years of professional experience. I have developed a strong foundation in the field and a passion for sharing my knowledge with others. I use my website, ToolsText.com, as a platform to share valuable information about hand tools, power tools, machinery, and DIY gadgets. I am committed to accuracy, relevance, and providing my audience with the information they need to succeed.

Leave a Comment